Tamarack-technologies HV1000 Manual do Utilizador descarregar pdf

HV1000 Remote Control Installation Instructions

HVRC.3

It is strongly recommended that this kit be installed by a qualified professional. Some state and local codes require

electrical wiring be performed by a licensed electrician. Check with your local code officials before installation.

Part Number: TTi-HVRC

The HVRC includes the following items:

Qty

Description

Black box with cover and hardware

Romex Clamp

2” Lg. Velcro Strip

3/4" Lg. Protective Sleeve

Yellow Wire Nut

Handheld Transmitter

Tools Required

Flat Head Screwdriver - Phillips Head Screwdriver - Needle Nose Pliers

Remove the cover from the junction box mounted on the HV1000 Whole

House Fan. Remove the knock-out on right side of the junction box. Place the

black box on the HV1000 mounting flange. Insert the Romex clamp into the

holes with the clamp side in the black box. Thread the nut onto the clamp and

tighten.

(Figure 1)

Figure 1

Slide the 3/4” protective sleeve over the White, Black, Red and Green wires in

the black box. Insert the wires through the clamp. Slide the sleeve into the

clamp and tighten.

(Figure 2)

Figure 2

Attach the Green ground wire inside the black box and the home power

supply to the ground screw in the junction box.

(Figure 3)

Figure 3

Tamarack Technologies, Inc. 508-759-4660 / Fax 508-759-6001

1 2

Página 1

HV1000 Remote Control Installation Instructions HVRC.3 It is strongly recommended that this kit be installed by a qualified professional. Some state

For installations without a wall switch: Twist the two Red wires from the HV1000 and the remote receiver (inside the black box) together with the inc

Sem comentários

Tamarack-technologies HV1000 Manual do Utilizador